Azalex Aerosol

Germicidal Barrier Cream

Special formulation of Natural Emollients

The Benefits

• Azalex is smooth in use and penetrates easily into the skin.
• Azalex does not coagulate.
• Azalex is very economical in use. Only a small amount is required to give hands complete protection and to prevent the penetration of dirt.
• Azalex may be left open in the Tub. It will not form a skin, therefore there is no wastage.
• Azalex protects against Oil, Grease, Solvents, Acids, Alkalis, Paints, Resins, Inks, and Tar that may contribute to skin irritations.
• Azalex has no harmful effects on the natural bacteria in Sewage systems or Septic tanks

Where to use

Azalex is recommended for all forms of Industry, where complete protection is required for hands.

How to use

Azalex is very easy to use. Simply rub well into the hands before starting work and wash off at the end of the working day.

Full instructions are on the Pack.

B.D.84 Aerosol

Belt Dressing

Designed to prevent slip and increase power output on belt driven equipment.

The Benefits

• B.D.84 helps to overcome Grease and Dirt build up.
• B.D.84 increases Belt life.
• B.D.84 does not contain Resin.
• B.D.84 is effective in both “Wet” and “Dry” conditions.
• B.D.84 can be used on Rubber, Leather, Canvas, Silicone and PTFE.
• B.D.84 increases transmitted power.

Where to use

• B.D.84 is recommended for use in all industries with belt driven equipment including, Garages, Road transport, Engineering outlets, Food factories and Bottling plants with Conveyer belts, Industrial fans, “V” belts and Pulleys that require regular servicing to ensure consistent, full power performance.
• B.D.84 can be used as a Non-Slip product on Stairways, Chequer plates and anywhere with problem “Slip” areas.

How to use

B.D.84 should be sprayed from approximately 30-50cm onto the belt. Slip may still be noticed initially on heavy drive equipment or because of excess Oil and Grease. When the solution has been evenly distributed over the whole surface, long lasting pulley to belt adhesion will occur.

Full instructions are on the Pack.

Bri-Glaze

Liquid Glass Cleaner

For the fast efficient cleaning of all forms of Glass and Mirrorware.

The Benefits

• Bri-Glaze quickly removes all forms of dirt including Oil, Road film, Insects, Finger marks, Crayon and Cosmetics from all Glass, mirrors and various other hard surfaces.
• Bri-Glaze can be used as a de-icer in severe weather conditions to remove ice from windows on all vehicles.
• Bri-Glaze cleans and polishes in seconds, therefore increasing efficiency and cutting down on labour costs.
• Bri-Glaze contains a special repellent, designed to keep the surface dust and dirt free for longer.

Where to use

Bri-Glaze is recommended for use in Washrooms, Canteens, Offices, Hotels, Portacabins and on Private and Public Transport.

How to use

Bri-Glaze is very easy to use. Simply spray on and wipe off with a clean cloth.

Full instructions are on the Container.

Citrasol

Heavy Duty Citrus Hand Cleaning Paste

Designed to remove the heaviest soiling from hands.

The Benefits

• Citrasol begins to dissolve immediately and removes all forms of dirt, especially Printing inks and Dyes which can be difficult to dislodge from the skin.
• Citrasol provides on-going protection for the skin as it contains a high quality antiseptic. 
• Citrasol can be applied to wet or dry hands.

Where to use

Citrasol is recommended for use in all forms of heavy industry including Commercial, Manufacturing, Printing and Packaging outlets.

How to use

Citrasol is very easy to use. Massage well into the hands, including the nails and cuticles, until the soiling is completely suspended in the paste. Rinse off and dry hands at the end of the working day.

The application of Arven Afterwork is recommended to replace the essential oils required for good skin condition.

Full instructions are on the Container.

Cleardrain

Drain Opener

Powerful chemical designed to cut through all stubborn drain blockages

The Benefits

• Cleardrain is highly concentrated Sulphuric Acid. It quickly cuts through even the heaviest blockages of Grease, Mud, Silt, Sewage, Clay and other obstacles.
• Cleardrain has a searching, penetrating action that ensures the cause of the blockage is dissolved and “opened”.

Where to use

Cleardrain is recommended for use in all Industrial and Commercial outlets to remove the worst cases of drain blockage.

How to use

Cleardrain is very easy to use. Carefully pour Cleardrain into the problem area and allow to soak in and cut through the blockage. Flush out with plenty of water.

Full instructions are on the Container.

Clipbrite

Powerful Scaffold Fittings  Cleaner & Brightener.

Penetrates quickly to removes Rust. Concrete, Cement and all other contaminates from Scaffolding Fittings.

The Benefits

• Clipbrite is non-toxic, non-caustic and contains no mineral acids or solvents.
• Clipbrite is fully biodegradable.
• Clipbrite prevents re-rusting of clips and fittings.
• Clipbrite extends equipment life by refurbishing old fittings which, would otherwise be thrown away.

Where to use

Clipbrite is recommended for use in all Industries where metal components are subject to outside use and storage in all weather conditions such as Scaffolding, Engineering, Building and Rail Companies.

How to use

Clipbrite is simple to use, immerse the tubes, clips or other equipment in the solution until they are clean and bright. We recommend that the fittings are then coated with Cliplube to lubricate and protect them from further weathering.